Figure 6-26 Adding Remaining Axis Channels; Figure 6-27 Axis Channels - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Configuring the Cameras
5.
Figure 6-26
6.
Figure 6-27
152
Click Add Cameras. A message Do you want to add the remaining analog channels to
the system? is displayed at the bottom of the screen as shown in
Adding Remaining Axis Channels
Click Yes to add the remaining channels. The list of channels associated with the camera
is added in the Camera list as shown in
AXIS Channels
Figure
Figure 6-27.
MAXPRO NVR 5.0 Installation and Configuration Guide
6-26.