Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 179

MAXPRO NVR 5.0 Installation and Configuration Guide
The first time MAXPRO NVR is installed, two default users are created.
• admin/trinity - Non-Windows user. Honeywell recommends to create a new NVR
user (See Adding a User
• Installed user - Windows user. You enter the credentials for this user while installing
the MAXPRO NVR software.
For MAXPRO NVR Turnkey (XE,SE,PE) Solution
There are 3 default users created for NVR turnkey units shipped with v4.0 or later version.
• admin/trinity - Non-Windows user. Honeywell recommends to create a new NVR
user (See Adding a User
• NVR-Admin/Password$123- Windows user.
• NVRServiceUser - Windows non-interactive user used for NVR Services.
Note:
For a Windows user, Honeywell recommends to disable the default
Administrator User account and create a new Administrator User account. See
Securing MAXPRO NVR
Administrator only when an administrative activity need to be performed,
Operator is preferred for all other activity.
The following table lists the various user roles and the privileges applicable to the role.
Viewer
NVR Administrator X
Operator X
Supervisor X
Internet Operator X
Live View Operator X
Legend
• "X" indicates that the user's role has access to the privilege.
• "-" indicates that the user's role does not have access to the privilege.
Note:
• The Internet Operator role is optimized for remote monitoring at lower
bandwidths (minimum bandwidth requirements still apply to be able to
stream required video data)
• The Live View Operator role can only access live video, and does not have
access to playback operations.
When you install MAXPRO NVR for the first time, a default user named "admin" is created. The
admin user is assigned the role "NVRAdministrator". Only the user having "NVRAdministrator"
C O N F I G U R I N G M A X P R O N V R
Performing User Administration
) in the Configurator tab and use the same to logon.
) in the Configurator tab and use the same to logon.
section on page 255 for more information. Logon as
Configurator Search
X X
- -
- X
- -
- -
Report
X
-
X
-
-
179