System Operation and Configuration
Record Setup
Scenario Mode (Scheduled Recording)
58
This NVR supports manual recording, scheduled recording, panic recording and alarm
recording. This section describes scheduled recording and alarm recording. For manual
recording and panic recording, please refer to the
and the
"Panic
Recording" section on page 37.
Scheduled recording enables the camera to start/stop recording automatically according to
the set time.
Navigate to
Record SetupScenario Mode on Live screen, and you can select
"High quality recording", "Low quality recording" and "My favorite scenario mode" on the pop
up window.
Under "My favorite scenario mode" there are three scenarios for selection: "Working day
scenario", "Holiday scenario" and "My favorite scenario" as shown in the following figure:
Figure 5-57 Select Scenario Mode
This screen contains the following settings:
High quality recording —enables main stream recording to ensure high resolution image
but with larger size.
Standard quality recording —enables auxiliary stream recording to ensure small size
image but with low resolution.
When the hard disk is full—set to overwrite / stop recording while the disk is full.
My favorite scenario —there are three scenarios for selection: "Working day scenario",
"Holiday scenario" and "My favorite scenario".
Follow the operation below to set scheduled recording:
"Manual
Recording" section on page
37