Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 309

MAXPRO NVR 5.0 Installation and Configuration Guide
Type a Name for the Rule and then click Finish.
12.
Note:
If the rule is not enabled, right click on the rule and click Enable.
Note:
Create and enable a similar rule for all Maxpro machines participating in the
secured communication.
If a secured rule is created on only one end point, there will not be any
communication between the machine with rule and machine without rule.
S E C U R I N G M A X P R O N V R
IPsec Policies for Secured Video Data Transmission
The Rule is created.
309