Logging On Using Profiles - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

Logging on and Getting Started
In this chapter...

Logging on Using Profiles

The MAXPRO NVR server addresses are saved in profiles. You need to select the profile
before logging on. You can set a profile as the default profile. When a profile is set as the
default, you do not need to select the profile each time you log on to MAXPRO NVR. You can
also modify and delete profiles.
Logging on to MAXPRO NVR
Caution:
1.
MAXPRO NVR 5.0 Installation and Configuration Guide
Section
Logging on Using Profiles
Managing Profiles
Port Forwarding
Getting to Know the MAXPRO NVR User Interface
Setting Preferences
Licensing Information
Logging off
Closing the MAXPRO®NVR User Interface
On Honeywell provided systems shipped with v4.0 or later version, a
default Windows user: NVR-Admin with password: Password$123 is
already configured and hence you are automatically logged on.
Honeywell recommends you to create and use a new Administrator
account to install and logon to MAXPRO NVR. See
NVR section on page
Administrator only when an administrative activity need to be performed,
Operator is preferred for all other activity.
Double-click on the desktop. The Log On dialog box appears.
Or
See page...
83
86
89
91
97
106
108
108
255 section for more information. Logon as
5
Securing MAXPRO
83