Adding Additional Streams For A Camera; Figure 6-14 Camera Properties Pane - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

Adding Additional Streams for a Camera

MAXPRO NVR 5.0 Installation and Configuration Guide
MAXPRO NVR V4.0 supports adding multiple streams for a single camera. The number of
streams that can be added depends on the model of the camera. You can also configure each
stream for a specific device based on your need. For example you can configure the first
stream for Live recording and the second stream for event based recording. Multistream or
Dual stream is not supported for encoders.
To configure the additional streams for a camera
1. Click the Camera tab, the camera page is displayed with the list of cameras discovered.
2. For the required camera, click
displayed see Figure 6-14.
Figure 6-14 Camera Properties Pane
3. Click the Add Stream button, an additional stream (Stream 2) is added see
C O N F I G U R I N G M A X P R O N V R
Configuring the Cameras
on the left corner, the camera properties pane is
Figure 6-15.
137