Deleting A User - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Performing User Administration
Note:
To update a user
1.
2.
3.
4.
5.

Deleting a User

You can remove a user from MAXPRO NVR. When you delete a user, all the associations made
to the user are also removed.
To delete a user
1.
2.
3.
4.
5.
Recommended stream Settings
To view the video streaming in NVR you must configure the primary stream for recording and
secondary stream for live video streaming in both Camera tab and Web Page. If the
configuration in NVR camera tab and specific Camera web page is different then the video is
not displayed.
To configure the Primary and secondary stream settings:
1.
2.
Note:
3.
182
Minimum length of the password is 6 characters. While adding a User, if the
password of other users added before 3.1 release is less than 6 characters then
an error message is displayed and all passwords need to be updated to meet the
minimum requirement.
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page.
Select the check box corresponding to the user you want to modify.
Change the settings such as user name, user description, and so on.
Click Save.
Click the Configurator tab. The System page displays by default.
Click the User tab to navigate to the User page.
Select the check box corresponding to the user you want to delete.
Click Delete. A confirmation message appears at the bottom of the display area.
Click Yes.
In NVR Camera tab, set the Primary Stream for recording that is for high resolution.
Set the Secondary stream for Live video streaming that is low resolution.
Set the Primary stream for recording which is 720p resolution and secondary
stream for Live which is 4CIF.
Launch the specific camera web page and then ensure that the same camera parameters
are set in web page.
MAXPRO NVR 5.0 Installation and Configuration Guide