Figure 5-4 Editing The Ports - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

L O G G I N G O N A N D G E T T I N G S T A R T E D
5
Logging on Using Profiles
Modifying a Profile
You can modify the profile name and the server address saved in the profile.
To modify a profile
1.
2.
3.
4.
5.
6.
7.
Deleting a Profile
1.
2.
3.
4.
5.
Editing the Ports
The MAXPRO NVR user interface includes a provision to modify the port number used by
MAXPRO NVR client to connect to the following components:
To edit the ports:
1.
Figure 5-4
2.
3.
88
In the client workstation, double-click the
dialog box.
Click Server Settings. The Server Settings dialog box appears.
In the Choose Profile box, select the profile you want to modify. The profile details
appear under Configuration in the Server Settings dialog box.
Change the Profile Name, as applicable.
Change the Server IP/Name, as applicable.
Click Save.
Click OK. The profile is modified.
In the client workstation, double-click the
dialog box.
Click Server Settings. The Server Settings dialog box appears.
In the Choose Profile box, select the profile you want to delete.
Click Remove.
Click OK. The profile is deleted.
• Trinity Server
• Trinity Controller
• NeoEngine Server
In the Server Settings dialog box, click Edit Ports. The port numbers associated to Server
IP/Name, Controller IP/Name and Storage Engine IP/Name are enabled for editing.
Editing the Ports
Change the port numbers, as applicable.
Click Save.
icon on the desktop to display the Log On
icon on the desktop to display the Log On
MAXPRO NVR 5.0 Installation and Configuration Guide