Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 23

P R E C A U T I O N S
List of Symbols
Symbol Explanation
The direct current symbol.
This symbol indicates that the power input/output for the prod-
uct is direct current.
The alternating current symbol.
This symbol indicates that the power input/output for the prod-
uct is alternating current.
The LDPE symbol.
This symbol indicates that this product is made of Low-Densi-
ty Polyethylene (LDPE).
The Direct Current symbol.
This symbol indicates that the product operates from a 12 V
direct current.
The Lead-free symbol.
This symbol indicates that the product does not contain lead
(Pb).
The CCC compliance logo.
This logo indicates that the product conforms with the China
Compulsory Certification guidelines.
The Environment Friendly Use-period symbol.
This symbol indicates the length of time that this electronic
product can used without harming the environment.
The RCM Compliance symbol.
This symbol indicates that the product conforms with the Aus-
tralian RCM guidelines.
The TUV Lab symbol.
This symbol indicates that the product has been safety tested
by the TUV Lab.
MAXPRO NVR 5.0 Installation and Configuration Guide 23