Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 304

S E C U R I N G M A X P R O N V R
1 1
IPsec Policies for Secured Video Data Transmission
4.
5.
304
Select "These IP Addresses" under Which Computers are in Endpoint 1.
a. Click Add to add IPs to the list.
b. Type the required IP under "This IP address or subnet" and then click OK.
Select These IP Addresses under "Which Computers are in Endpoint 2"
a. Click Add to add IPs to the list.
b. Type the required IP under "This IP address or subnet" and then click OK.
MAXPRO NVR 5.0 Installation and Configuration Guide