Deleting The Saved Nvr Recorders; Changing Default Port 443 For The Maxpro Web Client And Maxpro Nvr Mobile App - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

Deleting the Saved NVR Recorders

Changing Default Port 443 for the MAXPRO Web
Client and MAXPRO NVR Mobile app
Li mitation with Privacy Protection Settings in MAXPRO Mobile App
MAXPRO NVR 5.0 Installation and Configuration Guide
To delete the saved NVR Recorders:
Apple mobile device
Tap . The already saved NVRs are
displayed.
On the required NVR recorder, gently swipe
to right-side. The Edit and Delete options
are displayed as shown.
Tap Delete to delete the existing NVR
server. A warning message is displayed.
Tap Yes to delete Or Tap Cancel to retain.
See the Changing Default Port 443 for the MAXPRO Web Client and MAXPRO Mobile app
section on page 230 for more information.
• If Anonymization is enabled in NVR application then user will not be able to see the
video in MAXPRO mobile app/Web client and an error message is displayed.
• If Four eye authentication option is enabled in NVR application then user will not be
able to view playback video in MAXPRO mobile app/Web client.
M A X P R O N V R M O B I L E A P P
Android mobile device
Tap . The already saved NVRs are
displayed.
On the required NVR recorder, gently swipe
to right-side. The Edit and Delete options
are displayed as shown.
Tap Delete to delete the existing NVR
server. A warning message is displayed.
Tap Yes to delete Or Tap Cancel to retain.
Introduction
253