Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual page 245

Logon usi ng Touch ID (Fingerpri nt Authenti cated)
MAXPRO NVR 5.0 Installation and Configuration Guide
Apple mobile device
Tap Sign In.
• For Touch ID logon, see
more information.
Touch ID logon (For Fingerprint recognition supported mobile device only): This feature is
supported for fingerprint secured Android and IOS mobile devices. Maximum of 5 users
fingerprints can be configured per mobile device. The first login should be manual login and
you need to enter the credentials manually. After that, the succeeding logins can be based on
fingerprint authentication. The Fingerprint authentication logon option is displayed after the
first manual logon. You can see the fingerprint icon on the bottom left corner of the login
screen. Touch ID logon feature is supported for both Android and IOS devices.To use the
Touch ID logon facility user needs to verify the Touch ID
Verifying the Touch ID
Pre-requisite:
To verify the Touch ID configuration, it is assumed that the user should have configured the
Fingerprint authentication under Settings to unlock the mobile. Refer corresponding Mobile
(IOS) user manuals to set the Fingerprint based authentication to unlock.
1. Manually logon to the MAXPRO app and then navigate to Settings screen as shown
below.
M A X P R O N V R M O B I L E A P P
Android mobile device
Tap Log In.
Logon using Touch ID (Fingerprint Authenticated)
Introduction
for
245