How To Enable Video On Demand Feature In Maxpro Nvr - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

A P P E N D I X A
A
Scheduled Metadata and Database Backup
4.
How to Enable Video on demand feature in
MAXPRO NVR
1.
2.
3.
4.
5.
Note
How to allow Enable/Disable of cameras and
Enable Camera stream Redirect to NVR in ISOM
1.
326
Click Run to execute the utility.
Or
Click Reset to reset all ID.
Launch the Registry Editor Window.
Navigate to the below registry path HKEY_LOCAL_MACHINE->SOFTWARE-
>Wow6432Node->Honeywell->MaxproNVR->TrinityFramework.
Locate OnDemandLiveStreaming parameter and in the Data column.
By default value is 0 means its not enabled, If user want to enable Video on demand
feature it must be set to 1 as shown below. Change the 0x00000000 (0) value to
0x00000000 (1)
Restart the PC and both the NEO (NEO 1 and 2) services for the changes to take effect.
In VMS no need to perform any settings or config changes to enable VOD feature. No
recordings will take place in NVR once Video On Demand feature is enabled.
Navigate the path in NVR C:\Program Files (x86)\Honeywell\UVISOM.
MAXPRO NVR 5.0 Installation and Configuration Guide