Figure 6-50 Privacy Protection Settings; Figure 6-51 Anonymization Camera Level - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

C O N F I G U R I N G M A X P R O N V R
6
Privacy Protection Settings (GDPR Favored)
Figure 6-50
At Camera Level
At camera level user can enable or disable the Anonymization based on the requirement.
1.
2.
Figure 6-51
At User level
An Administrator can enable Anonymization for a specific user in Users tab. The
corresponding user will be able to view only anonymized video.
1.
2.
190
Privacy protection Settings
In Configurator > Camera tab, navigate to the camera properties for the specific
camera.
Under Primary Stream > Preference tab, select the Anonymization Enabled check box
as shown below. By default it is not selected.
Anonymization Camera Level
Navigate to Configurator > User tab.
For the required User, select the Anonymization check box as shown below. By default it
is Enabled for all the operators.
MAXPRO NVR 5.0 Installation and Configuration Guide