Logging On And Getting Started; Logging On Using Profiles - Honeywell MAXPRO NVR Series Hardware Installation And Configuration Manual

Tips for Logging on
Changing the Default Password
MAXPRO NVR 5.0 Installation and Configuration Guide
Note:
Set profiles if you have multiple MAXPRO NVRs and use the drop-down to
choose which NVR you would like to connect to.
6. Click Login. The Viewer tab appears.
• Click the Language option, and then select the required language from the drop-
down list. The supported languages are Arabic, Czechoslovakian, Dutch, Polish,
Portuguese, French, German, Russian, Italian, Spanish, and English. The default
language is English (US English).
• Select the Windows Logged-In User check box for logging on using the Windows
authentication (uses current logged in Windows account credentials). If the Windows
Logged-In User check box is cleared, the MAXPRO NVR user name and password is
used for authentication.
• Ensure that you avoid using the @ character in your password.
• Set profiles if you have multiple MAXPRO NVRs and use the drop-down list to choose
which NVR you would like to connect to.
• Select the Display Video on Alarm check box to display the viewer as an alarm
monitor.
Note:
Alarm monitor supports pop-up of camera associated to IO events only. Pop-up
on motion alarms is not currently supported.
Honeywell recommends you to change the default password and create a new password
before logging on to MAXPRO NVR software. See
settings.
To change the default password:
1. In the NVR login screen, click Change Password. The Change Password dialog box
appears.
L O G G I N G O N A N D G E T T I N G S T A R T E D

Logging on Using Profiles

Securing MAXPRO NVR for more security
85