Leds; Table 9: Port Link And Activity Leds On The At-Xem2-12Xt Line Card - Allied Telesis AlliedWare Plus x950 Series Installation Manual

Table 8. Twisted Pair Ports on the AT-XEM2-12XT Line Card (Continued)
Specification
Cabling
Maximum Distance
Connector

LEDs

Each port has a single LED that displays link and activity information.
Refer to Table 9.
Table 9. Port Link and Activity LEDs on the AT-XEM2-12XT Line Card
Solid Green
Flashing Green
Solid Amber
Flashing Amber
Off
The minimum cable requirements are:
- 100Mbps - Standard TIA/EIA 568-B-
compliant Category 3 unshielded
cabling.
- 1Gbps - Standard TIA/EIA 568-A-
compliant Category 5 or TIA/EIA 568-B-
compliant Enhanced Category 5 (Cat 5e)
unshielded cabling.
- 10Gbps -Standard TIA/EIA 568-C-
compliant Category 6a unshielded
cabling.
100 meters (328 feet)
8-pin RJ-45
State
The port has established a 10GBase link
to a network device.
The port is transmitting or receiving data
at 10GBase.
The port has established a 100Mbps or
1GBase link to a network device.
The port is transmitting or receiving data
at 100Mbps or 1GBase.
Possible causes of this state are listed
here:
- The port has not established a link with
another network device.
- The LEDs are turned off. To turn on the
LEDs, use the eco-friendly button.
x950 Series Installation Guide for VCStack
Description
Description
33