Download
Share
Print this page
Allied Telesis Patch 86251-08 Release Note
  1. Manuals
  2. Brands
  3. Allied Telesis Manuals
  4. Switch
  5. Patch 86251-08
  6. Release note
Allied Telesis Patch 86251-08 Release Note

Allied Telesis Patch 86251-08 Release Note

86251-08 patch release note
Hide thumbs

Advertisement

Quick Links

Download this manual
Patch Release Note
Patch 86251-08
For Rapier Series Switches
Simply connecting the world
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86251-08 for Software Release 2.5.1 on existing models of Rapier L3
managed switches. Patch file details are listed in Table 1.
Table 1: Patch file details for Patch 86251-08.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
This release note should be read in conjunction with the following documents:
■
Release Note: Software Release 2.5.1 for Rapier Switches (Document
Number C613-10354-00 Rev A) available from
documentation/documentation.html.
■
Rapier Switch Documentation Set for Software Release 2.5.1 available on
the Documentation and Tools CD-ROM packaged with your switch, or
from www.alliedtelesyn.co.nz/documentation/documentation.html.
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
86s-251.rez
9-Dec-2003
86251-08.paz
545820 bytes
www.alliedtelesyn.co.nz/

Advertisement

loading
Need help?

Need help?

Do you have a question about the Patch 86251-08 and is the answer not in the manual?

Questions and answers

Related Manuals for Allied Telesis Patch 86251-08

Summary of Contents for Allied Telesis Patch 86251-08

  • Page 1 Introduction This patch release note lists the issues addressed and enhancements made in patch 86251-08 for Software Release 2.5.1 on existing models of Rapier L3 managed switches. Patch file details are listed in Table 1. This release note should be read in conjunction with the following documents: ■...
  • Page 2 Level 3 Level 4 Features in 86251-08 Patch 86251-08 includes all issues resolved and enhancements released in previous patches for Software Release 2.5.1, and the following enhancements: PCR: 03179 The device responded when it received a directed broadcast ICMP echo request that was in its supernet, but not its subnet.
  • Page 3 Patch 86251-08 For Rapier Series Switches PCR: 03684 A fanAndPsRedundantFanTrap message was sent from a Rapier when the RPS (Redundant Power Supply) was turned on or off, even though Rapiers do not monitor the redundant fan status. This issue has been resolved.
  • Page 4 Module: IPG Module: OSPF RESET OSPF SPF [DEBUG] Patch Release Note Level: 3 Level: 2 Level: 3 Level: 2 Level: 2 Level: 3 Level: 2 Level: 3 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 5 Patch 86251-08 For Rapier Series Switches PCR: 03982 The SMTP proxy did not correctly filter sessions where messages were fragmented. This had the potential to prevent the detection of third-party relay attacks. This issue has been resolved. PCR: 03985 Sometimes on Rapier series switches, a severe multicast or broadcast storm depleted packet buffers, so the switch received packets intermittently.
  • Page 6 The GBLIP parameter is not accepted for a public interface when enhanced NAT is configured. Module: NTP Module: IPG Module: STP Patch Release Note Level: 2 Level: 2 Level: 3 Level: 4 ” Level: 3 Level: 3 Level: 2 Level: 2 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 7 Patch 86251-08 For Rapier Series Switches PCR: 31071 The warning given when a QoS policy is active on a port operating at reduced speed has been changed to reflect the problem more accurately. The old message was: The new message is:...
  • Page 8 Module: IPX2 Module: SWI Module: IPG 86s-251.rez 18-Sep-2003 86251-07.paz 487620 bytes Module: IPV6, SWI, IPG, VLAN Module: IPG Patch Release Note Level: 2 Level: 2 Level: 2 Level: 2 Level: 2 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 9 Patch 86251-08 For Rapier Series Switches PCR: 03524 OSPF disabled RIP unless RIP was activated using the SET OSPF RIP command. This issue has been resolved. PCR: 03530 Running the PURGE IP command with a multicast address and multiple sources was causing a fatal error. This issue has been resolved.
  • Page 10 Module: IPG Module: IPV6 Module: ETH Module: STP Module: MLDS Module: FIREWALL Patch Release Note Level: 2 Level: 3 Level: 3 Level: 3 Level: 2 Level: 2 Level: 2 Level: 1 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 11 Patch 86251-08 For Rapier Series Switches PCR: 03809 An additional check has been added for unknown GBIC models to determine if they are copper or fibre. PCR: 03817 A fatal error occurred when IPv6 fragmented a packet. Also, when a large...
  • Page 12 Module: IPG Module: DHCP, TELNET Module: TTY Patch Release Note Level: 2 Level: 2 Level: 2 Level: 2 Level: 2 Level: 2 Level: 2 Level: 3 Level: 2 Level: 2 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 13 Patch 86251-08 For Rapier Series Switches PCR: 03898 An ETH interface was sometimes shown as Up in the output of the SHOW INTERFACE command when it was actually Down. This issue has been resolved. PCR: 03902 Under some circumstances traffic did not have NAT applied if a standard subnet NAT rule was added to a public interface.
  • Page 14 Module: SWI Module: FIREWALL Module: SWI DISABLE SWITCH PORT={port-list|ALL} Patch Release Note Level: 3 Level: 2 Level: 3 Level: 3 Level: 3 86s-251.rez 30-July-2003 86251-06.paz 895445 bytes Network affecting: No Level: 4 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 15 Patch 86251-08 For Rapier Series Switches PCR: 03011 When the router priority was changed on a dynamic OSPF interface, the new priority did not appear in the output of the SHOW OSPF NEIGHBOUR command on neighbouring routers. The new priority only showed after the RESET OSPF command was executed on the neighbouring routers.
  • Page 16 Module: IPSEC Module: DHCP Module: IKMP Patch Release Note Level: 2 Level: 1 Level: 3 Level: 2 Level: 2 Level: 2 Level: 2 Level: 3 Level: 2 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 17 Patch 86251-08 For Rapier Series Switches PCR: 03524 OSPF disabled RIP unless RIP was activated using the SET OSPF RIP command. This issue has been resolved. PCR: 03532 Occasionally the TCP connection was terminated early during an IDENT proxy TCP session. This issue has been resolved.
  • Page 18 Module: IPV6 Module: BGP Module: OSPF Module: IPV6 Patch Release Note Level: 2 Level: 3 Level: 3 Level: 2 Level: 2 Level: 3 Level: 2 Level: 2 Level: 2 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 19 Patch 86251-08 For Rapier Series Switches PCR: 03569 A problem existed in a configuration with a single policy involving one private interface and two On Demand PPP public interfaces with NAT acting on traffic from the private to each of the public interfaces. Traffic generated on the device (e.g.
  • Page 20 Module: IPV6 Module: SWI Module: IPV6 Module: STP, SWI Patch Release Note Level: 1 Level: 3 Level: 4 Level: 3 Level: 4 Level: 3 Level: 3 Level: 3 Level: 4 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 21 Patch 86251-08 For Rapier Series Switches PCR: 03631 When a Finisar 8521 GBIC was used in an AT-A42/GBIC uplink module the link LED did not correctly show the link status. This issue has been resolved. PCR: 03635 IPv6 was selecting routes on interfaces that were down. This issue has been resolved.
  • Page 22 Module: STP Module: DHCP Module: PIM, PIM6 Patch Release Note Level: 3 Level: 3 Level: 3 Level: 1 Level: 2 Level: 2 Level: 2 Level: 3 Level: 2 Level: 2 Level: 2 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 23 Patch 86251-08 For Rapier Series Switches PCR: 03720 When changing from RSTP to STP mode, the STPCOMPATIBLE option for the RSTPTYPE parameter incorrectly appeared in the dynamic configuration. Also, when changing from RSTP to STP mode or vice versa, disabled STP ports did not remain in the disabled state. These issues have been resolved.
  • Page 24 ADD IPV6 INTERFACE command. Module: FIREWALL Module: SWI Module: SWI Module: RSVP Patch Release Note Level: 3 Level: 3 Level: 2 Level: 2 Level: 2 Level: 2 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 25 Patch 86251-08 For Rapier Series Switches Features in 86251-05 Patch file details are listed in Table 4: Table 4: Patch file details for Patch 86251-05. Base Software Release File Patch Release Date Compressed Patch File Name Compressed Patch File Size Patch 86251-05 includes all issues resolved and enhancements released in previous patches for Software Release 2.5.1, and the following enhancements:...
  • Page 26 Module: IPSEC, IKMP Module: BGP Module: ETH Module: SSL Patch Release Note Level: 2 Level: 2 Level: 3 Level: 3 Level: 2 Level: 2 Level: 3 Level: 3 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 27 Patch 86251-08 For Rapier Series Switches PCR: 03402 IP routes deleted from the route cache occasionally caused a fatal error. This issue has been resolved. PCR: 03405 The reconnection to the stream printing TCP port failed after a single successful connection was made. This issue has been resolved.
  • Page 28 Module: SWI Module: PIM, PIM6 Module: FIREWALL Module: IPV6 Patch Release Note Level: 2 Level: 2 Level: 3 Level: 2 Level: 3 Level: 3 Level: 3 Level: 2 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 29 Patch 86251-08 For Rapier Series Switches PCR: 03456 A VLAN interface receiving a PIM Prune message on a port stopped forwarding multicast data to that port too early. This could cause multicast data to arrive after a PIM Prune, so an override PIM Join message was not sent, leading to a loss of multicast data.
  • Page 30 Module: SWI Module: IPG Module: IPG Patch Release Note Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 2 Level: 2 Level: 2 Level: 3 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 31 Patch 86251-08 For Rapier Series Switches PCR: 03515 DHCP was offering network and broadcast addresses to clients. This issue has been resolved. PCR: 03517 An error was not returned if the SET FIREWALL POLICY RULE command was executed with PROTOCOL=1 when ICMP forwarding was turned on.
  • Page 32 Module: BGP Module: STP Module: CORE Module: STP, VLAN Patch Release Note 86s-251.rez 15-April-2003 86251-04.paz 240936 bytes Level: 3 Level: 4 Level: 2 Level: 2 Level: 2 Level: 4 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 33 Patch 86251-08 For Rapier Series Switches PCR: 03096 OSPF and RIP Hello packets were being sent out all trunked ports. Now these Hello packets are only sent out the master port of the trunked group. PCR: 03097 A device could not Telnet to a device outside its own subnet. This issue has been resolved.
  • Page 34 Module: BGP Module: SWITCH Module: FIREWALL Patch Release Note Level: 4 Level: 4 Level: 2 Level: 3 Level: 2 Level: 4 Level: 4 Level: 4 Level: 4 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 35 Patch 86251-08 For Rapier Series Switches PCR: 03152 An additional check has been added to validate the MASK specified in an ADD IP ROUTE command. The check tests that the mask is contiguous. PCR: 03153 The SHOW CONFIG=ACC command was not showing the rscript file. This issue has been resolved.
  • Page 36 Module: USER Module: IPV6 Module: PRI Module: IPV6 Patch Release Note Level: 2 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 37 Patch 86251-08 For Rapier Series Switches PCR: 03205 The following issues with DHCP have been resolved: • • • PCR: 03206 IPv4 filters now behave like IPv6 filters. PCR: 03208 When the configuration script was created using the CREATE CONFIG command, the GBLIP parameter in the ADD FIREWALL POLICY command was listed twice.
  • Page 38 Module: SWI, IPG, PIM Module: MVR Module: SWI Module: PIM Patch Release Note Level: 3 Level: 3 Level: 2 Level: 2 Level: 2 Level: 2 Level: 2 Level: 4 Level: 4 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 39 Patch 86251-08 For Rapier Series Switches PCR: 03255 The firewall doubled the IPSPOOF event timeout from 2 minutes to 4 minutes. This issue has been resolved. PCR: 03256 MLD did not respond correctly when it was in exclude mode and it received a request block.
  • Page 40 Module: OSPF Module: DHCP, Q931, TELNET Patch Release Note Level: 3 Level: 3 Level: 2 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 3 Level: 2 Level: 4 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 41 Patch 86251-08 For Rapier Series Switches PCR: 03332 A log message is now created when a user is forced to logout from an asynchronous port when another user (i.e. someone connected via Telnet) resets the asynchronous connection with the RESET ASYN command.
  • Page 42 1-3, 6-7 12,13 4,5,8,9 Module: IPG Module: HTTP Patch Release Note Level: 3 Level: 3 Level: 2 Level: 4 Level: 2 Level: 4 Group Address 235.1.1.1 234.1.1.1 255.1.1.1 Level: 3 Level: 3 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 43 Patch 86251-08 For Rapier Series Switches PCR: 03375 The following issues with IPv6 have been resolved: • • • PCR: 03379 If IPsec was using PPPoE, the initiator continued to keep the IPsec SA even if the PPPoE session failed and the ISAKMP Heartbeat timer expired. This issue has been resolved.
  • Page 44 Module: PPP ADD PPP CREATE PPP DELETE PPP SET PPP SHOW PPP Module: ETH Module: SWI Module: HTTP Patch Release Note Level: 2 Level: 1 Level: 3 Level: 4 Level: 1 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 45 Patch 86251-08 For Rapier Series Switches PCR: 03065 When the TX cable was unplugged from a fibre port the operating status was incorrectly reported as UP. This issue has been resolved. PCR: 03067 When replying to a DHCP REQUEST that had passed through a DHCP relay, the broadcast bit of DHCP NAK messages was not being set.
  • Page 46 11884 bytes Module: IPG, ETH Patch Release Note Network affecting: No Network affecting: No Network affecting: No Network affecting: No Network affecting: No Network affecting: No Network affecting: No Network affecting: No Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 47 Patch 86251-08 For Rapier Series Switches PCR: 02525 The ADD IPV6 HOST command was not accepting the INTERFACE parameter when adding a host with a link-local address. This issue has been resolved. PCR: 02527 TCP did not send a TCP Reset message under some circumstances, for example when the Telnet server was disabled.
  • Page 48 IP address(es) that stopped advertising, and a lifetime of zero (0). It continues to periodically multicast router advertisements for other interfaces. the router does nothing but silently discards the message. Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 49 Patch 86251-08 For Rapier Series Switches routers on the same link. By default the minimum is 450 seconds (7.5 minutes), and the maximum is 600 seconds (10 minutes). Preference Level The preference level is the preference of the advertised address as a default router address relative to other router addresses on the same subnet.

  • Page 50: Interface Commands

    The default value is the mid range 0. ADD IP INTERFACE=interface IPADDRESS={ipadd|DHCP} PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT} [other-ip-parameters] SET IP INTERFACE=interface [PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}] [other-ip-parameters] ENABLE IP ADVERTISE SHOW IP ADVERTISE [ADVERTISE={YES|NO}] [PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}] [other-ip-parameters] [PREFERENCELEVEL={-2147483648..2147483647|NOTDEFAULT}] [other-ip-parameters] Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 51 Patch 86251-08 For Rapier Series Switches ENABLE IP ADVERTISE Syntax ENABLE IP ADVERTISE Description This command globally enables ICMP Router Discovery advertisements on the router. However the device will not send or process Router Discover messages until at least one IP interface is configured using the ADD IP ADVERTISE INTERFACE command.
  • Page 52 (e.g. eth0 vlan1). Description This command deletes ICMP Router Discovery advertising from a single physical IP interface and its configuration from a physical IP interface. MAXADVERTISEMENTINTERVAL=1000 MINADVERTISEMENTINTERVAL=750 LIFETIME=3000 Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 53 Patch 86251-08 For Rapier Series Switches Example To delete Router Discovery from vlan1, use the command: DELETE IP ADVERTISE INTERFACE=vlan1 See Also DISABLE IP ADVERTISE ENABLE IP ADVERTISE ADD IP DISCOVERY INTERFACE SET IP DISCOVERY INTERFACE SET IP ADVERTISE INTERFACE...
  • Page 54 How many router advertisements the interface has sent since advertising was enabled. How many router solicitations the interface has received since advertising was enabled. An IP logical interface on this physical interface. Patch Release Note Preference Level Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 55 Patch 86251-08 For Rapier Series Switches Table 10: Parameters displayed in the output of the SHOW IP ADVERTISE command. (Continued) Parameter IP Address Advertise Preference Level See Also DISABLE IP DISCOVERY DELETE IP DISCOVERY INTERFACE ENABLE IP DISCOVERY ADD IP DISCOVERY INTERFACE...
  • Page 56 To configure VR IP Address Adoption, use the new parameter, ADOPTVRIP, that has been added to the CREATE VRRP and SET VRRP commands: CREATE VRRP=vr-identifier OVER=physical-interface SET VRRP=vr-identifier [ADOPTVRIP={ON|OFF}] [other-vrrp- IPADDRESS=ipadd [ADOPTVRIP={ON|OFF}] [other-vrrp- parameters] parameters] Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...

  • Page 57: Mld Snooping

    Patch 86251-08 For Rapier Series Switches The ADOPTVRIP parameter specifies that when the switch is acting as the VRRP master it should respond to requests directed at any IP address that it is backing up, even if it does not own that address. If it does not own the address the access requests that the switch will permit are limited to: ICMP echo requests (pings), Telnet, SSH, HTTP and SSL GUI, SNMP and DNS relay.
  • Page 58 Create a polling instance, to periodically ping the device ■ Create scripts to run when the device becomes unreachable and when it becomes reachable again ■ Configure triggers to run these scripts. Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 59 Patch 86251-08 For Rapier Series Switches To create a polling instance, use the command: ADD PING POLL=poll-id IPADDRESS={ipadd|ipv6add[%interface]} • The NORMALINTERVAL parameter specifies the time period between pings when the device is reachable. By default, this is set to 30 seconds. The...

  • Page 60: Icmp Redirect

    For more information on ICMP, see the IP Chapter in your switch’s Software Reference manual. POLL=poll-id SCRIPT=filename... [other-options...] POLL=poll-id SCRIPT=filename... [other-options...] Patch Release Note extension. target is located on the same on a directly connected Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 61 Patch 86251-08 For Rapier Series Switches Commands This enhancement introduces three new commands: ■ DISABLE IP ICMPREPLY ■ ENABLE IP ICMPREPLY ■ SHOW IP ICMPREPLY DISABLE IP ICMPREPLY Syntax DISABLE IP ICMPREPLY[={ALL|NETUNREACH|HOSTUNREACH|REDIRECT}] Description This command disables ICMP reply messages. If ALL is specified, all configurable ICMP message replies are disabled. If NETUNREACH is specified, all network unreachable message replies are disabled (RFC792 Type 3 Code 0).

  • Page 62: Static Igmp

    The user will also be able to filter some IGMP debug messages by source IP address and group destination address. Meaning A list of ICMP configurable reply messages and whether they are enabled or disabled. Patch 86251-08 for Software Release 2.5.1 Patch Release Note C613-10356-00 REV I...

  • Page 63: Configuration Example

    Patch 86251-08 For Rapier Series Switches Figure 6: Forwarding multicast data over a specified interface and port. Configuration Example The following configuration example illustrates the steps required to create a static IGMP association. It assumes that vlan1 has already been configured as an IP interface on the switch.

  • Page 64: Show Ip Igmp

    Examples To display information about all group destination addresses starting with “224” on vlan1, use the command: SHOW IP IGMP INTERFACE=VLAN1 DESTINATION=224.*.*.* Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 65 Patch 86251-08 For Rapier Series Switches Figure 7: Example output from the SHOW IP IGMP DESTINATION command showing Static Groups. IGMP Protocol ---------------------------------------------------------------------------------- Status ... Enabled Default Query Interval ... 125 secs Default Timeout Interval ... 270 secs Last Member Query Interval ... 10 (1/10secs) Last Member Query Count ...

  • Page 66: New Commands

    To add port 5 to the list of ports through which multicast data for 224.1.2.3 will be forwarded over vlan1, use the command: ADD IP IGMP DESTINATION=224.1.2.3 INTERFACE=VLAN1 PORT=5 See Also DELETE IP IGMP DESTINATION SHOW IP IGMP Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 67 Patch 86251-08 For Rapier Series Switches CREATE IP IGMP DESTINATION Syntax CREATE IP IGMP DESTINATION=ipaddress INTERFACE=interface [PORT={ALL|port-list}] where: ■ ipaddress is an existing IGMP group destination address. ■ interface is the name of the interface over which multicast data is forwarded.
  • Page 68 INTERFACE parameters must already exist for this command to succeed. Examples To stop the switch forwarding all multicast data for 224.1.2.3 over vlan1, use the command: DESTROY IP IGMP DESTINATION=224.1.2.3 INTERFACE=VLAN1 See Also CREATE IP IGMP DESTINATION Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 69 Patch 86251-08 For Rapier Series Switches DISABLE IP IGMP DEBUG Syntax DISABLE IP IGMP DEBUG Description This command disables all IGMP debugging messages and resets the DESTINATION and SOURCEIPADDRESS parameters set in the ENABLE IP IGMP DEBUG command to ALL. Debugging is disabled by default.
  • Page 70 The source IP address specified by the SOURCEIPADDRESS parameter in the ENABLE IP IGMP DEBUG command. If the parameter was not given, "No" is displayed instead of the IP address. Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 71 Patch 86251-08 For Rapier Series Switches ■ software release 86s-251 and patch 86251-04 are loaded, but the patch was corrupted after a restart or reboot. The Rapier16fi requires the 86251-04 patch to operate correctly. Without this patch the port map is incorrect. An incorrect port map will cause problems if the configuration file refers to a port number.
  • Page 72 Down Down Down Down Down Down Down RESTART REBOOT Patch Release Note 00:01:22 ifLastChange 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 00:00:00 Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 73 Patch 86251-08 For Rapier Series Switches Figure 3: Router startup messages INFO: Self tests beginning. INFO: RAM test beginning. PASS: RAM test, 4096k bytes found. INFO: BBR tests beginning. PASS: BBR test, 128k bytes found. PASS: BBR test. Battery OK.
  • Page 74 PPP interface 1, and enable STAC LZS compression on the synchronous link with a check mode of LCB, use the command: ADD PPP=1 OVER=vlan2-any COMP=LINK STACCHECK=LCB SYNn DS3n ISDN-callname ACC-callname MIOXn-circuitname TDM-groupname TNL-callname VLANn-servicename Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 75 Patch 86251-08 For Rapier Series Switches CREATE PPP Syntax CREATE PPP=ppp-interface OVER=physical-interface [other parameters] where: ■ ppp-interface is the PPP interface number, from 0 to 511. ■ physical-interface is: • • • • • • • • Description This command creates the specified PPP interface running over: ■...
  • Page 76 PPP interface number, from 0 to 511. ■ physical-interface is: • • • • • • • • SYNn DS3n ISDN-callname ACC-callname MIOXn-circuitname TDM-groupname TNL-callname VLANn-servicename SYNn DS3n ISDN-callname ACC-callname MIOXn-circuitname TDM-groupname TNL-callname VLANn-servicename Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...
  • Page 77 Patch 86251-08 For Rapier Series Switches Description This command is used to change the configuration parameters of a PPP interface running over: ■ a synchronous port ■ a DS3 port ■ an ISDN call ■ an ACC call ■ a MIOX circuit ■...
  • Page 78 SHOW PPP Patch Release Note Patch 86251-08 for Software Release 2.5.1 C613-10356-00 REV I...

This manual is also suitable for:

Rapier series