Management Software And Interfaces; Management Methods; Management Panel; Power Supplies - Allied Telesis AlliedWare Plus x950 Series Installation Manual

Management
Software and
Interfaces
Management
Methods
Management
Panel

Power Supplies

Line cards are ordered separately. Refer to the product data sheet on the
Allied Telesis web site for a list of approved transceivers.
Here are the management software and interfaces:
 AlliedWare Plus management software.
 Command line interface, available locally through the Console port
or remotely over the network.
 Web browser interface available remotely over the network.
The AlliedWare Plus management software comes pre-installed on the
switch.
You can manage the switch as follows:

Command line interface accessed locally through the Console port
or remotely using Telnet or Secure Shell.
 Remote access using the web browser interface and HTTP.
 Remote access with SNMPv1, v2c, or v3.
The pre-installed management panel has the following features:
 Console RS-232 port for local management (no IP address
required),
 USB 2.0 port for storing backup copies of system configuration
files, updating management software, and other management
functions.
 An eco-friendly button for turning off the port and system LEDs to
reduce power consumption.
 Network management port for initial configuration and
maintenance access to the chassis.
The switch has slots for two power supplies on the back panel. The switch
can be powered by a single power supply. Adding a second power supply
provides power redundancy. Power supplies are ordered separately. Refer
to "AT-PWR600 Power Supply" on page 47.
x950 Series Installation Guide for VCStack
21