Allied Telesis AlliedWare Plus x950 Series Installation Manual page 150

Chapter 8: Configuring the Master Switch
Table 26. Configuring the Master Switch- Part II (Continued)
Step
12
Return to the Privileged Exec mode.
awplus(config)# exit
13
Enter the WRITE command to save your change.
awplus# write
Building configuration ...
[OK]
14 Restart the switch with the REBOOT command.
awplus# reboot
reboot system? (y/n):
awplus#
15 Type "Y" for yes.
16 Wait two minutes for the switch to initialize its management software.
17 Go to "Verifying the Master Switch" on page 151.
150
Description and Command