Figure 103: Disconnecting The Fan05 Module From The Switch; Figure 104: Sliding The Fan Module From The Switch - Allied Telesis AlliedWare Plus x950 Series Installation Manual

x950 Series Installation Guide for VCStack
2. Carefully pull on the handle to disconnect the line card from the
internal connector in the switch. Refer to Figure 103.
Figure 103. Disconnecting the FAN05 Module from the Switch
3. Slide the fan module out of the switch. Refer to Figure 104.
Figure 104. Sliding the Fan Module from the Switch
4. Continue with the next procedure to install a new FAN05 Module.
195