Table of Contents
Advertisement
Chapter 1: Overview
Ports 1 to 24 on the AT-x950-28XTQm Switch
Cable
Requirements
24
The specifications for twisted pair ports 1 to 24 on the AT-x950-28XTQm
Switch are listed in Table 2.
Table 2. Twisted Pair Ports 1 to 24 on the AT-x950-28XTQm Switch
Specification
Port Speed
Duplex Mode
Maximum Distance
Connector
Note
Network devices connected to the ports must be IEEE 802.3u
compliant.
The cable requirements are listed here:
100Mbps - Standard TIA/EIA 568-B-compliant Category 3
unshielded cabling.
1/2.5/5Gbps - Standard TIA/EIA 568-A-compliant Category 5 or
TIA/EIA 568-B-compliant Enhanced Category 5 (Cat 5e)
unshielded cabling.
10Gbps -Standard TIA/EIA 568-C-compliant Category 6a
unshielded cabling.
Description
Here are the supported speeds:
- 100Mbps
- 1/2.5/5/10Gbps
Here are the guidelines to setting port
speeds:
- 100Mbps can be set manually or with
Auto-Negotiation.
- 1/2.5/5/10Gbps require Auto-
Negotiation.
The default port setting is Auto-
Negotiation.
Full-duplex only
100 meters (328 feet)
8-pin RJ-45
Advertisement
Table of Contents
