Table of Contents
Advertisement
Chapter 2: Virtual Chassis Stacking
68
You cannot use a 10Gbps breakout cable for a trunk. Refer to
Figure 36.
Figure 36. Unsupported Trunk with a 10Gbps Breakout Cable
The base 10Gbps transceiver ports and AT-XEM2-12XS Line Card
support 1Gbps transceivers. However, you cannot use 1Gbps
transceivers for a stack trunk.
Trunk links must be direct connections between ports on the
switches, without any intermediary network devices, such as
media converters, routers, or other Ethernet switches. Figure 37 is
an example of an unsupported trunk because it contains media
converters.
Wiring closet 1
Media
Converters
Wiring closet 2
Figure 37. Unsupported Trunk with Intermediary Network Devices
Breakout
Cable
Advertisement
Table of Contents
