Figure 93: Placing The Ethernet Line Card In Its Anti-Static Bag; Figure 94: Installing The Line Card Blank Cover - Allied Telesis AlliedWare Plus x950 Series Installation Manual

7. If you are not installing the line card in another switch, store it in its
anti-static bag and shipping container. Refer to Figure 93.
Figure 93. Placing the Ethernet Line Card in its Anti-static Bag
8. Do one of the following:
 For instructions on how to install another card in the slot, start with
step 2 in "Installing an Optional XEM2 Ethernet Line Card" on
page 100.
 If you are not installing another line card in the slot now, continue
with the next step to install the blank cover.
9. Orient the blank cover as shown in Figure 94, with the notch on the
bottom left, and slid it into the slot.
Notch
Figure 94. Installing the Line Card Blank Cover
x950 Series Installation Guide for VCStack
187