Unpacking The At-Pwr600 Ac Power Supply; Figure 44: Removing The Power Cord And Documents From The At-Pwr600 Ac Power Supply - Allied Telesis AlliedWare Plus x950 Series Installation Manual

Unpacking the AT-PWR600 AC Power Supply

To unpack the AT-PWR600 Power Supply, perform the following
procedure:
1. Remove the power cord and any documents from the accessory
partition. Refer to Figure 44.
Figure 44. Removing the Power Cord and Documents from the AT-
2. Remove the partition from the shipping box. Refer to Figure 45 on
page 92.
PWR600 AC Power Supply
x950 Series Installation Guide for VCStack
91