Allied Telesis Patch 86261-04 Release Notes

Patch Release Note
Patch 86261-04
For Rapier and AT-8800 Series Switches
Simply connecting the world
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86261-04 for Software Release 2.6.1 on existing models of Rapier and
AT-8800 Series switches. Patch file details are listed in Table 1.
Table 1: Patch file details for Patch 86261-04.
Base Software Release File
Patch Release Date
Compressed Patch File Name
Compressed Patch File Size
This release note should be read in conjunction with the following documents:
■
Release Note: Software Release 2.6.1 for Rapier and AT-8800 Series
Switches (Document Number C613-10383-00 Rev A) available from
www.alliedtelesyn.co.nz/documentation/documentation.html.
■
Rapier Series Switch or AT-8800 Series Switch Documentation Set for
Software Release 2.6.1 available on the Documentation and Tools CD-ROM
packaged with your switch, or from
documentation.html.
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
86-261.rez
19-Nov-2003
86261-04.paz
261628 bytes
www.alliedtelesyn.co.nz/documentation/