Installation - Epson RC620 CU Manual

14.1.3 Installation

Contents
TP1 (with cables)
Mode selector key
Environmental Conditions
The Teach Pendant must be used in an environment that conforms to the following
requirements to ensure safe and reliable operation.
Ambient temperature
Ambient relative
temperature
Protection structure
Environment
Operating Precautions
 Do not drop the Teach Pendant or hit hard against other objects to avoid damage, as
the case of the Teach Pendant may be damaged since the main body is made of
resin.
 Use the hand strap to prevent dropping the Teach Pendant during operation.
 Do not hit the touch panel of the Teach Pendant against a hard object or put
excessive pressure on it.
excessive pressure is put on it, it may be damaged.
 Do not press or rub the surface of the front panel push buttons with a hard object
CAUTION
such as a tool. The surface of the buttons may be damaged as they are easily
scratched.
 Wipe the dirt and oils adhering to the surface of the Teach Pendant display with a
soft cloth dampened with a neutral detergent or an alcohol solvent.
 If using the mounting bracket, check that the bracket and screws are not bent or
loosened.
RC620 Rev.8
Setup & Operation 14. Option : Teach Pendant TP1
: 1 unit
: 2 units
Item
0 to 50 deg C (with minimal variation)
5 to 95%
IP65 (excluding the connector)
- Keep away from dust, oily smoke, salinity, metal powder
and other contaminants.
- Keep away from flammable or corrosive solvents and
gases.
The touch panel is made of glass.
Condition
Therefore, if
79