Replacing The Small Fan - Epson RC620 CU Manual

6.1.3 Replacing the Small Fan

Small Fan (1) Turn OFF the Controller.
Removal
(2) Remove the Large Fan.
(3) Remove the UPS Battery.
(4) Remove 2 screws securing the Small
(5) Pull out the cable connector of Small
(6) Remove the Small Fan from the
NOTE

RC620 Rev.8
Maintenance 6. Maintenance Parts Replacement Procedures
Refer to Maintenance: 6.1.2 Replacing the Large Fan.
Refer to Maintenance: 6.2.2 Replacing the UPS Battery.
Fan and fan cover (Small).
Remove the fan cover (Small).
Fan from the DMB board to the
direction shown in the photo.
Controller and pull out the fan cable to
the direction shown in the photo.
Be sure to pull the Small Fan slowly
and avoid the other cables to prevent
the fan connector from being trapped.
149