Brake (For 6-Axis Robots) - Epson RC620 CU Manual

Setup & Operation 14. Option : Teach Pendant TP1
14.3.8 Brake (6-Axis robots only)
This section indicates the brake ON / OFF switching for each joint.
NOTE

When you use the 6-axis robot, the <F8> key is displayed.
(1) Press the <F8> key in the [Jog & Teach] screen. The following screen appears.
106
The following screen appears when the password is set up.
Enter the password (1 to 16 characters) and press the <OK> key.
For password setting, refer to Operation 14.5. Password Setup.
RC620 Rev.8