Recovering The Hdd; Hdd Recovery Procedure (S/N 01/02-00501 To 01/02-01000); Recovering Windows - Epson RC620 CU Manual

7. Recovering the HDD

This section describes how to recover the current HDD in the RC620 controller with the
Embedded OS installed.
The recovery procedure differs according to the controller RC620 serial number. Refer
to the appropriate section and recover the current HDD.
01-00501 to 01-01000
02-00501 to 02-01000
01-01001 or later
02-01001 or later
7.1 HDD Recovery Procedure
1
2
3
To recovery the HDD, prepare the following.
PS/2 keyboard
PS/2 mouse
NOTE - When recovering Windows, USB keyboard and USB mouse are not available. Make

sure to use PS/2 keyboard and PS/2 mouse.
- The recovery data is built in the RC620 controller HDD with the Embedded OS
installed. However, depending on the HDD status, the recovery work does not work.
When you cannot recover, replace the HDD.

7.1.1 Recovering Windows

■ When the Windows is recovered, all the data in the HDD will be erased. Make
sure to make a back up of data before recovering Windows. The procedure for
backup is described in Maintenance: 4.3 Backup.
CAUTION
NOTE When you accidentally select "RC620 Recovery", the recovery tool runs. In this case,

press <N> key in the step (4) below to reboot the RC620 controller.
(1) Connect the PS/ keyboard and the PS/2 mouse to the RC620.
(2) Turn ON the RC620 controller power supply.
RC620 Rev.8
Serial No.
7.1 HDD Recovery Procedure
7.2 HDD Recovery Procedure (S/N 01/02-01001 or later)
Recovery Step
Back up the current data
Windows recovery
Restore the backup data
Item
(The USB keyboard and the USB mouse cannot be used in Windows recovery.)
Maintenance 7. Recovering the HDD
Refer to
(S/N 01/02-00501 to 01/02-01000)
(S/N 01/02-00501 to 01/02-01000)
Reference
Maintenance 4.3 Backup
Maintenance 7.2 Recovering Windows
Maintenance 4.4 Restore
When using USB keyboard.
When using USB mouse.
Note
201