Replacing The Large Fan - Epson RC620 CU Manual

6.1.2 Replacing the Large Fan

Large Fan (1) Turn OFF the Controller.
Removal
(2) Remove cables from TP port and USB
(3) Remove 6 screws and the front panel.
(4) Remove 2 screws securing the Large
(5) Pull out the Large Fan.
NOTE

(6) Pull out the connector of Large Fan
RC620 Rev.8
Maintenance 6. Maintenance Parts Replacement Procedures
port on the front panel if they are
connected.
Fan and the fan cover.
The fan cable is connected to the main
chassis. Be sure to pull it out slowly.
from the DMB board to the direction
shown in the photo.
Remove the Large Fan.
147