Transfer With E-Mail - Epson RC620 CU Manual

(6) [Browse For Folder] dialog appears. Select the folder copied in procedure (3) and
(7) [Controller Status Viewer] dialog appears to confirm the Controller status.

5.3.4 Transfer with E-mail

Follow this procedure to transfer the data by e-mail that was saved to the USB memory.
(1) Insert the USB memory to a PC that supports sending of e-mail.
(2) Make sure that the USB memory has following folders.
(3) Send all the folders by e-mail.
- Delete files that do not relate to the project before transfer.
NOTE

- This function is used to send the data to the system director and EPSON from the end
users for problem analysis.
RC620 Rev.8
click the <OK> button.
For details, refer to View Controller Status in EPSON RC+ 6.0 User's Guide 5.11.7
Controller Command (Tools Menu).
S_serial number_data status was saved
→ Example: S_12345_200608074410
Setup & Operation 5. Memory Port
39