Lan (Ethernet Communication) Port; About Lan (Ethernet Communication) Port - Epson RC620 CU Manual

6.

LAN (Ethernet Communication) Port

- For Ethernet (TCP/IP) communication with robot application software, refer to EPSON
NOTE

RC+ 6.0 Online Help or User's Guide 12. TCP/IP Communications.
- Refer to EPSON RC+6.0 option Vision Guide 6.0 manual for other details of connection
of the Controller and the Smart Camera.
- This port is not used for EtherNet/IP. Use the port for fieldbusI/O board. For other
details, refer to
 Security support for the network connection
CAUTION
6.1 About the LAN (Ethernet Communication) Port
The RC620 Controller has two ports: LAN-1 and LAN-2.
Both are Ethernet communication ports and support 100BASE-TX / 10 BASE-T.
These two ports are used for the following purposes.
LAN-1 port (SPEL
Connection with other Controller or PC
Connection with Smart Camera (when the program starts running)
LAN-2 port (General Ethernet port)
General Ethernet connection from the application on the Windows
Connection with the Smart Camera (when creating the sequence)
NOTE

When using the Smart Camera, the both LAN-1 and LAN-2 must be connected.
RC620 Rev.8
Setup & Operation 6. LAN (Ethernet Communication) Port
Robot Controller RC620 option Fieldbus I/O manual
The network connecting function (Ethernet) on our products assumes the use in
the local network such as the factory LAN network. Do not connect to the
external network such as Internet.
In addition, please take security measure such as for the virus from the network
connection by installing the antivirus software.
+
dedicated Ethernet port)
This port can be used as an Ethernet (TCP/IP) communication port to communicate
between multiple controllers from robot application software.
This port can be used for connection of the Controller and the Smart Camera when
you execute commands such as VRun from the robot application software.
This port can be used for the general-use Ethernet connection from the application
on the Windows or OS.
This port can be used for the connection of the Controller and the Smart Camera
when you create the Smart camera sequence or display the live image.
Ethernet
LAN-1 LAN-2
Controller
.
Smart Camera
41