Maintenance 6. Maintenance Parts Replacement Procedures
6.7 PCI Board
PCI Board
(1) Turn OFF the Controller and unplug the power connector.
Removal
(2) Disconnect the external cables from the PCI Board if they are connected.
(3) Remove 10 screws and the top panel.
(4) Remove a screw for the CPU holder
(5) If the CPU (Faster) is connected:
(6) Remove a screw securing the PCI
(7) Remove the PCI Board from the PCI-BPB slot.
196
assembly and remove the holder
assembly.
Remove 2 screws of COM panel
attached on the back panel.
Board on the Controller rear side.
RC620 Rev.8