Restore - Epson RC620 CU Manual

4.4 Restore

Restore the Controller status from the EPSON RC+ 6.0.
■ Make sure that the data used for restore was saved previously for same
Controller.
■ Do not edit the backup files. Otherwise, operation of the robot system after data
CAUTION
restoration to the Controller is not assured.
(1) Select the EPSON RC+ 6.0 menu-[Tools]-[Controller] to display the [Controller
(2) Click the <Restore Controller...> button to display the [Browse For Folder] dialog.
(3) Specify the folder that contains the backup data. Backup data folders are named
 NOTE
RC620 Rev.8
Tools] dialog.
using the following format:
B_serial number_date status was saved
→ Example: B_12345_200608074410
Data saved with the Controller status storage function can also be specified for restore.
Specify the following folder.
S_serial number_data status was saved
→ Example: S_12345_200608074410
Maintenance 4. Backup and Restore
137