Safety; Option : Teach Pendant Tp1 - Epson RC620 CU Manual

14. Option : Teach pendant TP1

Here describes the functions and operating instructions of the Teach Pendant TP1 – Option for
the Robot controller.
14.1 Function

14.1.1 Safety

For details of Safety, refer to Safety Chapter in the User's Guide. Please read and
understand the chapter before using the robot system.
 Only trained personnel should design and install the robot system.
personnel are defined as those who have taken robot system training and
maintenance training classes held by the manufacturer, dealer, or local
representative company, or those who understand the manuals thoroughly and
have the same knowledge and skill level as those who have completed the training
courses.
 Only authorized personnel who have taken the safety training should be allowed to
execute teaching or calibration of the robot system.
The safety training is the program for industrial robot operator that follows the laws
and regulations of each nation. The personnel who have taken the safety training
acquire knowledge of industrial robots (operations, teaching, etc.).
The personnel who have completed the robot system-training class held by the
manufacturer, dealer, or locally-incorporated company are allowed to maintain the
WARNING
robot system.
 Only authorized personnel who have taken the safety training should be allowed to
maintain the robot system.
The safety training is the program for industrial robot operator that follows the laws
and regulations of each nation.
training acquire knowledge of industrial robots (operations, teaching, etc.),
knowledge of inspections, and knowledge of related rules/regulations.
personnel
maintenance-training classes held by the manufacturer, dealer, or locally
incorporated company are allowed to maintain the robot system.
RC620 Rev.8
Setup & Operation 14. Option : Teach Pendant TP1
who have completed
The personnel who have taken the safety
the robot
Trained
The
system-training and
73