Transferring Battery Change Date To Omega Client - CEStronics CES OMEGA FLEX Assembly And Operating Manual

11.12 Transferring battery change date to OMEGA Client

11.12 Transferring battery change date to OMEGA Client

When you hold the Battery Master in front of the reading field, an event is generated that
automatically transfers the current date to the CEStronics Suite (with offline devices, transfer does
not occur until a connection is made with the RF-Stick).
Required:
Battery Master
l
PC with OMEGA Client installed
l
For offline devices: RF-Stick
l
Procedure:
Steps
1. Hold the Battery-Master in the reading field of the locking device for approx. two seconds.
The current date is set as the battery change date.
2. Remove the Battery-Master from the reading field.
The battery change date is transmitted automatically for online devices, for offline devices
after connection with an RF stick.
Page 80 of 83
Signal
2x short green signals
Wide shield replacement handle set ILS-I