Administration; Basic Information On Administering Omega Flex Systems - CEStronics CES OMEGA FLEX Assembly And Operating Manual

6 Administration

Target group of this section::
IT/administration specialists
l
System operators
l

6.1 Basic information on administering OMEGA FLEX systems

Which transponder System range
The system range is the highest level of differentiation between OMEGA FLEX systems. It specifies
technology does the
which locking media technology (LEGIC or MIFARE) is used in the system:
system support?
Where are Operating mode
authorisations The operating mode specifies the location where authorisations for the locking media are stored.
There are two operating modes for OMEGA FLEX MIFARE systems:
stored?
(only relevant for MIFARE
systems)
Both of these operating modes can be combined within one OMEGA FLEX system.
How is the system Type of administration
You can manage your system with different types of administration.
managed?
Available for OMEGA FLEX MIFARE in LINE operating mode and OMEGA FLEX LEGIC:
Available for OMEGA FLEX MIFARE in V-NET operating mode:
Wide shield replacement handle set ILS-I
6.1 Basic information on administering OMEGA FLEX systems
OMEGA FLEX MIFARE
l
OMEGA FLEX LEGIC
l
LINE Authorisations are stored in the locking device
V-NET Authorisations are stored in the locking medium
Offline with master
media
Offline with RF-Stick
Online with wireless
online network
Virtual
No software is used. Settings are transmitted to
the locking devices via master media.
Settings are specified in the OMEGA Client
software and transmitted to the locking devices
via an RF-Stick.
Settings are specified in the OMEGA Client
software and transmitted to the locking devices
via a wireless online network.
Settings are specified in the OMEGA Client
software and are transmitted to the locking
medium and not the locking device.
Page 25 of 83