Fitting The Version For Short Plate - CEStronics OMEGA ACTIVE IES Fitting And Operating Instructions

Fitting
6.4 Fitting the version for short
plate
Fig. 69 - Installation overview of the short plate
1 Outside shield with coupling unit and square
2 Outside fastening plate
3 M5 × 12 mm fastening screws for outside shield
4 Inside fastening plate
5 M5 fastening screws for the fitting, length depending on
door thickness (see table on page 37)
6 Inside plate with electronics module and battery
compartment
7 M5 × 6 mm fastening screws for inside plate with the
electronics module
8 Inside shield
Page 64 of 128 OMEGA ACTIVE IES