Chains
-
G e a r b o x P i v o t B o l t . This bolt locates the gearbox t o the lower frame and must
be slackened off before making an adjustment.
G e a r b o x C l a m p i n g Bolt.
Slacken the securing nut which also positions the
adjuster.
Adjuster.
If
the primary chain is t o be TIGHTENED, slacken off the front locknut
a few turns and then tighten up the REAR
LOCKNUT
until the chain tension
i s
correct. To SLACKEN the chain, reverse the locknut procedure.
Securing Gearbox.
Re-tighten the clamp nut, locknuts and pivot bolt and ensure
absolute security.
Fig. 35.
G E A R B O X IN P O S I T I O N (Ti00 & T110)
Showing a d j u s t m e n t points.