230 Paper Jams - Lexmark MX81 Series Service Manual

Action
Step 3
Ensure the upper redrive motor cable and the socket "REDRIVE" on the
controller board is properly connected.
Is the above cable properly connected?
Step 4
Reset the machine.
Does the error continue?
Step 5
Reset the machine.
Does the error continue?

230 paper jams

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
1
Pull down the rear door.
2
Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
Yes
Go to step 4.
Replace the upper
redrive motor. See
"Upper redrive motor
removal" on page
361.
Go to step 5.
Replace the controller
card. See
board removal" on
page
Diagnostic information
74
No
Reseat the connection.
Problem solved.
Problem solved.
"Controller
386.
7463