Printed Page Count; Permanent Page Count (Perm; Processor Id; Engine Setting [X] - Lexmark MX81 Series Service Manual

3
Do one of the following:
•
Depending on the printer model, press OK or touch
•
Press X to return to the Printer setup menu.

Printed Page Count

The value of this setting gauges the amount of usage on the printer. The value of the Printed Page Count setting will
equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset to zero.
To view the page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Printed Page Count.
Note: The value of the setting cannot be changed manually.
Permanent Page Count (Perm page count)
The value of this setting indicates the total amount of pages that have been printed. After all print tests have been
completed, the value will reset to zero.
To view the permanent page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Perm Page Count.
Note: The Permanent Page Count value cannot be reset.

Processor ID

The value of this setting indicates the ID of the processor on the controller card within the printer.
To view the Processor ID:
From the Diagnostics menu, navigate to PRINTER SETUP > Processor ID.

Engine Setting [x]

These settings are used by the Engine code to further customize the behavior of the printer to applications. The value
of [x] is any value from 1 to 16.

Edge to Edge

When set to On, this shifts all four margins (top, bottom, left, and right) to the physical edge of the page (printable area
of a supported paper size). This feature does not work in PPDS emulation.
To change this setting:
From the Diagnostics menu, navigate to PRINTER SETUP > Edge to Edge.

Parallel Strobe Adjustment (Par 1 Strobe Adj)

This setting adjusts the factory setting for the amount of time the strobe is sampled to determine that valid data is
available on the parallel port.
to save any changes.
Service menus
246
7463