Drawer Controller Pcba Removal - Lexmark MX81 Series Service Manual

3
Remove the three screws (B) from the bottom of the left cover.
4
Pull the left cover, and remove.

Drawer controller PCBA removal

1
Remove the drawer assembly rear cover. See
2
Remove the drawer assembly left cover. See
3
Disconnect all cables (J3, J4, J11, J10, J9, J8, J7, J6, and J1) from the controller PCBA, then remove the two screws
(A).
"Drawer assembly rear cover removal" on page
"Drawer assembly left cover removal" on page
Repair information
564
7463
562.
563.