Lexmark MX81 Series Service Manual page 452

8
Remove the cable holder (C) and the three screws (D) securing the support brackets on the front of the ADF.
9
Remove the top support bracket (E) then use a flat-head screw driver to remove the bottom support bracket (F).
10
Push the ADF scanner frame away from the scanner CCD (1), and then carefully lift the front of the scanner CCD
(2).
Note: Carefully maneuver the scanner CCD so that it does not get caught on any of the obstacles on the front
side of the ADF scanner frame.
Repair information
452
7463