Hcit Drawer Assembly Interface Cable Removal - Lexmark MX81 Series Service Manual

5
Lift the motor cover, and remove the two screws (D) using a #1 Phillips screwdriver.
6
Remove the tray lift drive motor.

HCIT drawer assembly interface cable removal

1
Remove the HCIT drawer assembly rear cover. See
2
Remove the HCIT drawer assembly left cover. See
3
Disconnect the interface cable (J1) from the controller PCBA.
"HCIT drawer assembly rear cover removal" on page
"HCIT drawer assembly left cover removal" on page
Repair information
587
7463
580.
580.