Hcit Controller Pcba Removal - Lexmark MX81 Series Service Manual

5
Pull the tab to release, then remove the right cover.

HCIT controller PCBA removal

1
Remove the drawer assembly rear cover. See
2
Remove the drawer assembly left cover. See
3
Disconnect all the cables (J3, J5, J11, J10, J9, J8, J7 and J1) from the controller PCBA, then remove the two screws
(A).
"HCIT drawer assembly rear cover removal" on page
"HCIT drawer assembly left cover removal" on page
Repair information
547
7463
542.
543.