•
"Right frame pivot removal" on page 351
•
"Sensor (rear door interlock) removal" on page 352
Duplex motor removal
1
Remove the paper tray from the machine.
2
Remove the rear door. See
3
Remove the rear lower cover. See
4
Remove the fuser access door. See
5
Remove the three screws (A) securing the duplex motor to the machine.
6
Position the printer so that you can access the bottom of the machine, as shown in the following image.
"Rear door removal" on page
"Rear lower cover removal" on page
"Fuser access door removal" on page
Repair information
307.
309.
349.
345
7463