Sensor (Input) Miscellaneous Jam 2 Service Check; Sensor (Input) Miscellaneous Jam 3 Service Check; 202 Paper Jams - Lexmark MX81 Series Service Manual

Sensor (input) miscellaneous jam 2 service check

Action
Step 1
Check the sensor (input) for proper operation.
a
Enter the diagnostic mode.
b
Select Base sensor test.
c
Observe the line item control panel door interlock.
Does the display on the control panel change every time the sensing area
of the above sensor is interrupted or blocked?
Step 2
Check the above sensor for proper connection.
Is the above sensor connected properly?
Step 3
Reset the machine.
Does the error continue?

Sensor (input) miscellaneous jam 3 service check

Action
Step 1
Check the media size setup and tray guides for all media trays.
Does the media size in use match the size set for all media trays?
Step 2
Check the media condition in all media trays.
Is any of the media in any of the media trays crumpled or damaged?
Step 3
Reset the machine.
Does the error continue?

202 paper jams

CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching.
Yes
Go to
Replace the sensor
(control panel door
interlock).
Go to step 3.
Replace the controller
board. See
board removal" on
page
Yes
Go to step 2.
Replace the damaged
media.
Contact the next level
of technical support.
Diagnostic information
65
No
step 3. Go to step 2.
Replace the
connection.
Go to step 3.
Problem solved.
"Controller
386.
No
Replace the media, or
change the media size
setup.
Go to step 3.
Problem solved.
7463