Sensor (Adf Media Exit) Late Leaving Or Not Cleared Jam Service Check - Lexmark MX81 Series Service Manual

Action
Step 5
Check the ADF transport motor for proper operation.
a
Enter the Diagnostics Menu.
b
Touch TESTS.
c
Touch Transport Motor/Deskew Clutch.
d
Touch either Motor Forward or Motor backward
e
Perform test.
Does the ADF pick motor operate properly?
Step 6
Check the ADF transport motor for proper connection.
Is the above component properly connected?
Step 7
Place an undamaged document in the ADF, and perform a ADF test.
Does the error remain?
Step 8
Perform a print test using the ADF.
Does the problem remain?

Sensor (ADF media exit) late leaving or not cleared jam service check

Action
Step 1
Check the media path for contaminates.
Is the media path free of excess media dust and foreign objects such as
paper clips and staples?
Step 2
Check the ADF output bin for obstructions.
Is the ADF output bin free from obstructions?
Step 3
Check the ADF bottom door for proper closing.
Is the ADF bottom door properly closed?
Yes
Go to
Replace the ADF rear
side drive parts pack.
Go to
drive parts pack
removal" on page
472.
Replace the ADF
controller PCBA.
Contact the next
highest level of
support.
Yes
Go to step 2.
Go to step 3.
Go to step 4.
Diagnostic information
131
No
step 7. Go to step 6.
Replace the
connection.
"ADF rear side
Problem solved.
Problem solved.
No
Remove all
contaminates from the
media path.
Remove all
obstructions.
properly close the ADF
bottom door.
7463