Stapler/Offset Stacker Controller Pcba Removal - Lexmark MX81 Series Service Manual

Stapler/offset stacker controller PCBA removal

1
Remove the left cover. See
2
Disconnect all the cables (J11, J5, J6, J4, J26, J24, J22, J23, J17, J3, J2, J1, J18, J15, J1, J12, J14, J8, J20, J9, and J7),
then remove the three screws (A) from the controller PCBA.
"Stapler/offset stacker left cover removal" on page
Repair information
613
597.
7463