Media Turn Guide Removal - Lexmark MX81 Series Service Manual

17
Gently detach the media aligner roller.
Warning—Potential Damage: When removing the media aligner, ensure that you retain the attached spring.

Media turn guide removal

1
Remove the left cover. See
2
Remove the controller board access shield. See
3
Remove the media tray. See
4
Open the control panel door.
5
Remove the toner cartridge.
6
Remove the imaging unit.
"Left cover removal (MX71x)" on page
"Controller board access shield removal" on page
"Media tray removal" on page
Repair information
325
301.
374.
7463
388.